Basic Knowlage for civil engineer Freshers on site
All civil engineer must have this practical knowledge while went for interview, but most of civil engineer has no knowledge about this, following are some important points, which will be very useful
during interview, this all points are simple but all civil engineer must know about this,
2. Minimum diameter of main bar and distribution bar in the slab should be 8mm.
3. Maximum diameter of main bar and distribution bar in the slab should be 1/8 mm of slab thicknes.
4. D.P.C. ( Dam Proof Course ) thickness should be 2.5cm.
5. Plinth height should be 45cm.
6. Maximum chair spacing should be 45cm.
7. Maximum diameter for double bar should be 12mm.
8. Dimension tolerance for cubes = ±2mm
9. Maximum absorption by brick = 15%
10. height of building of one floor should be 3.1m
11. Riser height should be 15cm.
12. Compressive strenth should be 3.5 N/mm2
By knowing this simple points and dimensions your interview will be easy and chances to get job will increase

2 comments
Click here for commentsNice
Replygood work, thank you for this infermation
ReplyConversionConversion EmoticonEmoticon